Center for Advancement of Postgraduate Studies and Research, Faculty of Engineering

CAPSCU (www.capscu.eng.cu.edu.eg) is the Center for Advancement of Post-Graduate Studies and Research in Engineering Sciences at Cairo University. This center was established in 1974, in cooperation with UNIDO and UNESCO organizations of the United Nations to foster relations between Cairo University and National Industry. CAPSCU main objectives focus on supporting post-graduate studies and research programs taking place in the Faculty of Engineering-Cairo University (FECU), especially those related to industrial applications.

CAPSCU provides engineering consultations, technical services, research and development and continuous engineering education to National and International Industrial Establishments and Governmental Organizations. Consultations are offered on contractual and work order basis in all engineering disciplines.

CAPSCU provides facilities and equipment to laboratories as well as encouraging Faculty Members and Postgraduate Students to publish the results of their research in reputable Journals and Conferences. A directory of M.Sc. and Ph.D. Theses granted by FECU and categorized by department is annually published by CAPSCU starting from the year 1995. In addition, and in the same year 1995, CAPSCU has created annual prizes for recent holders and supervisors of distinguished Theses granted by FECU.

CAPSCU operates as an independent business unit within the Faculty of Engineering. Work orders or official contracts are made between CAPSCU and its clients to determine the project objectives, project principal investigator and team members, duration of the project, project budget and terms of payment etc. CAPSCU takes care of all tax deductions required by current laws of the Egyptian government. CAPSCU overheads 20% by internal regulations and these are used to run CAPSCU administrative duties and also to support post-graduate and research activities in the various departments of the Faculty of Engineering.


Prof. Mohamed Elsebelgy MEP Department 1974-1978	Prof. Saad Awad MEP Department 1978-1984	Prof. Salah Bayoumi MDP Department 1984-1989

Prof. Abdel-Rahman Ragab MDP Department 1989-1998	Prof. Mohamed Megahed MDP Department 1998-2005	Prof. Said Megahed MDP Department 2005-2007

Prof. Sherif A. Mourad Struct. Eng. Dept. 2007-2009	Prof. Amr A. Adly Elect. Power Eng. Dept. 2009-2010	Prof. Adel Yehia Akl Structural Eng. Dept. 2010-Present

CAPSCU conducts its activities and its commitments by its main pool of consultants who are all the faculty members of FECU (www.eng.cu.edu.eg) and other faculties at Cairo University (www.cu.edu.eg) together with distinguished industrial experts. The expertise of the faculty professors is supported by the laboratories, computational facilities, Internet services, libraries to help promote technical studies, R&D work, industrial research, continuous education in engineering sciences, on-the-job training to practicing engineers, feasibility studies, technical and financial assessment of industrial projects, etc

Figure (1) presents CAPSCU organization structure and how projects are managed as the work at CAPSCU is project-based. This type of business administration has proved to be quite successful for the type of services provided by CAPSCU.

During the past few years, CAPSCU activities have focused on the following three areas:

CAPSCU has cooperated with many establishments since its inception in 1974. These include ministries, government authorities, public sector companies, private sector companies, and banks. About 1500 projects have been successfully completed since 1980. About half of these projects were conducted for public sector companies, a quarter for government organizations and a quarter for national banks and private sector companies. Starting from 1995, the percentage of clients from private sector has notably increased. This is attributed to the privatization policy adopted by the Egyptian government.

CAPSCU offers continuous engineering education services to practicing engineers and technical staff in almost all-engineering disciplines. The training is conducted by CAPSCU consultants and is usually at the client site. Training courses can also be tailored to meet certain technologies when required. The following are representative lists of the most frequently run training courses. The courses are conducted mainly On-Company-Site or at the premises of the Faculty of Engineering at Giza when laboratory facilities are needed. The courses lies in the areas of Mechanical Power Engineering, Finite Elements and Computer Applications, Hydraulic Control Systems, Vibrations, Machine Design, Materials and Failure Analysis, Pressure Vessel and Piping Systems, Project Planning and Policies, Metallurgical Engineering, Electrical and Control Engineering, Gas and Oil Engineering.

Pathways to Higher Education, Egypt project is an international grant contracted between Cairo University and Ford Foundation managed by CAPSCU. Phase-I of the project implemented during the period from September 2002 to September 2005 according to the grant agreement no 1020-1912. In addition to enhancing the research skills of about 700 university graduates and sharing in FGF training of 1600 BBSA graduates during Phase-I of PHE/EG, the project has succeeded in building the institutional capacities of Cairo University in a number of ways. A dedicated "PHE/EG Management Team" has been formed and was trained during the Pilot phase of the project (Phase-I). Educational material covering 18 courses have been developed, edited, well tested and published. A network of faculties within Cairo University have been successfully collaborating under PHE/EG setting an exemplar model for a well orchestrated and coordinated team work within a mega-university such as Cairo University. The dissemination activities conducted during the course of implementing Phase-I have created in-depth awareness of the global objectives of the project among university graduates.

The intermediate stage of the project addresses the need to continue implementation of project activities in other governorates reaching the underprivileged target group of undergraduate students in preparation of Phase II of the PHE/EG project. It is mandatory to maintain the momentum of the basic idea and global objectives of "Pathway to Higher Education". To achieve this momentum towards implementing Phase II of the project, the Ford Foundation has allocated funds under Grant Number 1020-1912-1 in the contract signed with Cairo University, in September 2005.

PHE/EG aims at enhancing skills of socially disadvantaged (underprivileged) groups among junior and senior undergraduates as well as graduates of Egyptian Universities including those located in the Upper Egypt governorates. The objective is to improve their capacity to access post-graduate studies, to enhance their chances to benefit from the IFP program and/or to acquire better employment opportunities.

The partners of Pathways on the Intermediate Stage and Phase-II are carefully selected to enable successful implementation of the project on the national level. They are Cairo, Ain-Shams, Assiut, Helwan, Minia, South Valley, Fayoum, Beni Suef and Sohag Universities as well as the Future Generation Foundation (FGF) and the National Council for Women (NCW). These distinguished partners help Pathways Management team in the policy formation and implementation of the project training activities in Upper Egypt governorates.

A high-level Steering Committee was established. It includes nine university presidents representing the partnership with higher education institutions, and representatives of the other concerned partners (NCW and FGF). The terms of reference of the steering committee are to ensure achievement of project objectives, develop policies, supervise the implementation process, and to monitor and evaluate the training program. The existence of nine university presidents in the steering committee facilitates the implementation of the project in their respective universities. Former university presidents that were members in PHE/EG SC continue to be members in the intermediate and second phase of the project.

1	Planning and Controlling	Dr. Kamel Ali Omran	977-223-954-X	2005
2	Systems and Creative Thinking	Dr. Shaker Abdel Hameed	977-403-016-8	2005
3	Research Methods and Writing Research Proposals	Dr. Samy Tayie	977-403-013-3	2005
	Statistical Data Analysis	Dr. Amany Mousa	977-223-955-8	2005
	Teams and Work Groups	Dr. Adel M. Zayed	977-223-989-2	2005
	Risk Assessment and Risk Management	Dr. Atef M. A- Moneim	977-223-984-1	2005
	Argumentation: Techniques of Measurement and Development	Dr. Tareef Shawki Mohamed	977-223-957-4	2005
	Communication skills	Dr. Inas Abou Youssef	977-223-956-6	2005
	Negotiation Skills	Dr. Ahmed Fahmy Galal	977-223-986-8	2005
	Analytical Thinking	Dr. Ayman Amer	977-403-011-7	2005
	Problem Solving and Decision Making	Dr. Mohamed A. Abdel Reheem	977-223-987-6	2005
	Stress Management	Dr. Gomaa Sayed Yousef	977-223-988-4	2005
	Accounting For Management and Decision Making	Dr. Ahmed Farghally Hassan	977-403-014-1	2005
	Basics of Managerial Economics	Dr. Fakhry El-din Farghaly	977-403-009-5	2005
	Economic Feasibility Studies	Dr. Ashraf El-Sharkawy	977-403-010-9	2005
	Health, Safety and Environment	Dr. Ahmed Farghally Hassan	977-403-012-5	2005
	Wellness Guidelines: Healthful Life	Dr. Salma Fouad Dowara Dr. Mohamed Hani Ratib	977-223-985-X	2005
	Basic Arabic Language Skills for Scientific Writing	Dr. Mohamed Hassan Abdel Aziz	977-403-015-X	2005
	General Lectures Directory	Dr. Abdel Alim Hashem Dr. Sayed Kaseb	977-403-017-6	2005
	Enhancement of Research Skills Graduation Projects Directory	Dr. Abdel Alim Hashem Dr. Sayed Kaseb	977-403-018-4	2005

CAPSCU has participated in enhancing the capabilities of various laboratories in FECU. This has encouraged involvement of many laboratories in conducting applied industrial research.

CAPSCU Publications: Since 1995, a Directory of Post-Graduate Theses and Dissertations granted by the various departments of FECU is annually published by CAPSCU (CAPSCU/DPGTD Series). Next are the published volumes in this series:

CAPSCU Prize for “Distinction in Graduate Studies”: Starting from the year 1995, and in order to encourage post-graduate studies and research and publication of its results in reputable journals and conferences, CAPSCU had created its annual prizes for recent holders and supervisors of distinguished Theses granted by FECU for “Distinction in Graduate Studies”. The prizes are granted to recent holders of M.Sc and Ph.D degrees and their supervisors from the various departments of FECU. All conditions and regulations for this CAPSCU prize can be found in the website (www.capscu.eng.cu.edu.eg).

C- CAPSCU Consultation Activities
Year	Number of Technical Assistance and Training Provided To National Industry	Most Important Clients Receiving Technical Assistance
2000	74	جهاز تنمية شمال سيناء – هيئة كهرباء مصر – شركة العز لصناعة الصلب – استشارات هندسية (البنك الأهلى المصرى)
2001	67	شركة المقاولون العرب – شركة النصر للمشبوكات – وزارة التربية والتعليم (وحدة تنفيذ المشروعات) - استشارات هندسية (البنك الأهلى المصرى)
2002	64	جهاز تنمية شمال سيناء – مشروع تطوير القطاع الخاص PSDP – شركة العز لصناعة الصلب – الهيئة العامة للمستشفيات والمعاهد التعليمية (معهد السمع والكلام) - مركز التجارة العالمى – مسقط
2003	65	الشركة المصرية للأملاح والمعادن (أميسال) – شركة العبوات الزجاجية – شركة بترول بلاعيم – الهيئة المصرية العامة للتوحيد القياسى وجودة الإنتاج - استشارات هندسية (البنك الأهلى المصرى)
2004	63	شركة النصر للأسمدة – الشركة المصرية للأسمدة – شركة حلوان للاسمدة – شركة بترول خليج السويس (جابكو) – شركة مصر للألومنيوم - UNDP
2005	62	شركة جمسة للبترول – شركة السكر والصناعات التكاملية – شركة IFFCO – شركة حلوان للأسمدة
2006	50	IMC, PSDP, Etanmia AlEdaria, National Bank of Egypt, EDfu Fertilizer Factory EGC-Egypt

Environment / Chemical / Mechanical Engineering

Project Title	Date

Environmental impact assessment of an ammonia –urea fertilizer plants	2004
Assessment of technical offers for Magnesium Sulphate plant	2003
Assessment of proposed equipment for gold extraction mine	2002
Environmental audit of a petrochemical company	2002
Improving occupational environment in a dyers and finishers industry	2002
Comparison of water-cooled versus air-cooled A/C systems	2002
Process and mechanical design of an ethyl alcohol plant	2001
Assessment of the efficiency of a steam boiler	2001
Assessment of an upgrading study for a sodium sulphate plant	2001
Evaluation of combustion gases in an annealing furnace	2000
Evaluation of environmental upgrading plans for a casting company	2000
Performance evaluation of spherical pressure vessels	2000
Electromechanical design of utilities for hospital buildings	2000
Technical consultations on specification of a Titanium heat exchanger	2000
Performance evaluation of recrystalizers – heat exchangers system	1999
Comparison between characteristics of three types of steam boilers	1998
Evaluation of a technical feasibility study for a special salt project	1998
Evaluation of feasibility for a dry salt project	1998
Development of an aluminum reduction cell	1997
Testing of insulation in household water heaters	1991
Analysis and evaluation of gases emitted from cement kilns	1991
Design of salt water filters	1991
Computer simulation of wind movement around a high tower building	1990
A study of wind movement patterns around the sphinx	1990

Mechanical Design

Project Title	Date
Failure analysis of damaged Waukesha gas engine	2004
Inspection and assessment of steel structure and process piping of a drilling platform following a fire incident	2004
Failure analysis of tower crane used for material handling during construction of high tower buildings	2004
Assessment of pressure carrying capacities of risers on offshore platforms	2003
Testing of hardness and assessment of balancing of wheat milling rolls	2003
Quality control and testing of adhesive tapes for electrical insulation	2003
Design calculation and test results on uprights of a storage system	2003
Failure analysis of fractured studs on an offshore platform	2003
Investigation of a gearbox and failure diagnosis of its oil thrower	2002
Failure analysis of ball valves for an oil pipeline	2002
Failure analysis of a steam turbine	2002
Failure analysis of the explosion of risers on an offshore platform	2002
Design calculation and compression test on upright for storage system	2001
Failure diagnosis of gear reducers of bucket elevator conveyors	2001
Investigations of an explosion of an acetylene pipeline	2001
"Why a DHS did not function during an fermural fracture surgery"	2001
Failure diagnosis of the gear box of a bucket elevator	2000
Measurement of noise and vibration in a pressure reduction LPG station	2000
Failure analysis and design evaluation of a dry batch mixer	2000
Design of hydrostatic test equipment on pipe components	1999
Design of a green sand shaker in a casting production line	1999
Design of a washing line in a radiator fabrication line	1999
Fault diagnosis in the gear box of a steam turbine	1999
Stress analysis in crude oil and solar pipelines	1999
Modernization of control systems on a pipe making firm	1999
Consultation in quality assurance of household products	1998
Maintenance of electronic equipment	1998
Failure analysis and design evaluation of a family of cement silos	1998
Technical feasibility study for a toy factory	1998
Design of a number of belt conveyors for wheat transport	1998
Composite material behavior under impact loads	1997
Design of hydraulic circuits for 400 ton hydraulic press	1997
Design of hydraulic circuits for a pipe testing machine	1997
Design of hydraulic circuits for a heat treatment furnace	1997
Stress analysis in sugar production equipment	1997
Stress analysis of baskets of sugar centrifuges	1997
Design and fabrication of incinerators of various capacities	1997
Dynamic and static analysis of a bus structure using FEM	1997
Stress analysis in pressure vessel components	1996
Design improvement of 200 HP Diesel tractor	1996
Failure analysis of a belt conveyor	1996
Stress analysis in cathode structures of aluminum reduction cells	1996
Tests of compressed oxygen cylinders	1995
Failure analysis of an extrusion press	1995
Analysis of thermal stresses in aluminum reduction cells	1994
Design of a 200 m³ water storage tank	1994
Provision of consultations required for commissioning of a rice mill	1994
Design of equipment for dust collection in steel mill		1994
Performance improvement of some household equipment		1994
Selection of material handling equipment for Safaga Sea Port		1994
Stress Analysis of the cathode of aluminum reduction cell		1993
Design of ammonia tank supports on railway cars		1993
Testing of pipe connections		1993
Development of belt conveyor fabrication for cement firms and ore mines		1993
Plans for improvement of production capacity of belt conveyors		1992
Inspection and maintenance plans for a moving crane		1992
Testing of plastic pipes, wire ropes to relevant standards		1992
Development of a welded bogie for train cars		1991
Design of filters for air carrying dust emitting from cement silos		1991
Failure analysis of bearings of cement furnace and cement mill bodies		1991
Design of side-cutting machine of V-belts		1991
Design of factories for transformation of waste to fertilizer		1991
A study of creep in belt conveyors		1991
Engineering documentation for hydraulic and pneumatic systems		1990
Inspection of injection machines acquired by the high dam authority		1990
Upgrading of the design office of a vehicle manufacturing company		1990
Stress analysis in mobile steel structures		1989
Study of a suction blower of cement furnace gases		1989

Metallurgical Engineering

Project Title	Date
Failure analysis of damaged sea lines for oil and water injection in an oil field	2004
Assessment of hardness distribution in HAZ in pipes operating an environment rich with H₂S to determine susceptibility to SSCC	2004
Failure analysis of ball valves in an oil company	2003
Failure analysis of tubing-coupling threads in drilling tubes of an oil field	2003
Development of quality control equipment for carbon ramming paste	2003
Failure analysis of a heat resisting cast steel tubes	2003
Failure investigations of natural gas piping at a steel mill	2003
Failure analysis of production tubing in an oil well	2003
Corrosion Control in equipment of an offshore oil field	2002
Assessment of proposed equipment for gold extraction mine	2002
Failure analysis of production tubing of an oil well	2002
Assessment of offers for supply of gold ore dressing and leaching etc.	2002
Failure analysis of a corroded gas separator end of an oil well	2001
Quality report on DN 600 ductile iron and fittings	2001
Mechanical and metallurgical properties of a stainless steel bands	2001
Failure analysis report on rupture of a manual spanner	2000
Failure analysis on rupture of pipe line for transport of crude oil	2000
Tests on samples of copper, steel pipes	1999
A study on weld ability of some stainless steel grades	1999
Microstructure and scale formation on reinforcing steel bars	1999
A study of national need for special steels	1998
Mechanical properties and microstructure of 3 types of gun steel	1998
Cathodic protection plans of pipe lines	1997
Tests on irrigation PVC pipes	1996
Failure analysis of drive system of a GMC car	1994
Adherence of outer zinc layer to ductile cast iron pipes	1992
Testing of stainless steel holders, pipe specimens, wire ropes etc.	1990
Inspection of casting of various shapes	1988
Suitability of local steel pipes for inner-city natural gas transport	1986
A study on purification of iron ore	1985

Industrial Engineering and Engineering Economy

Irrigation and Hydraulics

Project Title	Date
A report on sand washing procedures on a hospital foundation	2000
Design of water pumping system for land reclamation	2000
Reports on protection of transmission line from flash floods	1999
Technical consultations on the effect of water hammer on pipelines	1999
Influence of the 1997 storm on protection work against flash floods	1999
Causes of water leakage in the foundation of a large building	1998
Geophysical study of ground water in Taba City	1998
Influence of oxide lakes on potable water wells	1997
Design of public work network of the New Taba City	1996
Studies on protection from water hammer	1996
Evaluation of water resources of certain areas in Sinai Peninsula	1995
Design and supervision on digging a well in the new valley of Egypt	1994
Engineering design of intersection of two water canals	1993
Revision of design for water supply network	1993
Preparation of hydrological map for Sinai Peninsula	1993
Design of Bani-Swaif concrete canal section	1992
Determination of possible locations of hydraulic energy in Egypt	1992
Plans for protection of power stations from flash floods	1992
Plans for protection of transmission lines from flash floods	1991
Plans for protection of transformer stations from flash floods	1991

Architectural and Structural Engineering

Category	Training programs / courses
Industrial Engineering	Project Planning and Monitoring
	Project Planning via Primavera
	Project Planning and Management
	Quality and Productivity
Civil Engineering	Bidding Documents for Buildings and Constructions
	Management Systems for Building and Structures
	Quality Control and Inspection in Construction Sights
	Selection, Specifications and Testing of Building Materials
Control Engineering	Advanced Hydraulics Applications to Oil and Gas Equipment
	Advanced PLC Programming Using S7
	Computer Control Networks and Communications
	Essentials of Hydraulic Drives and Control Systems
	Hydraulic components and circuits for Steel Mill Equipment
	Hydraulic components and circuits in Steel Mills
	Hydraulic Control Systems
	Hydraulic Control Systems for Steel Making Equipment
	Hydraulic Control Systems in Steel Making Equipment
	Instrumentation and Automatic Control
	Introduction to DCS & SCADA
	Introduction to Man-Machine Interface Programming
	Introduction to PLC
	Man-Machine Interface Programming using Fix Dynamics
	PLC Programming Using S7
	PLC S5 – Introductory
	Principles of Measurement and Control System
Electrical Engineering	Maintenance of Lighting Equipment and Electrical Transformers
	Basic Electrical Measuring and Industrial Electronics
	Electric Motor Drives
	Electronic Circuit Design for Lighting Equipment
	Energy Planning and Policy Analysis
	Repair of Printed Circuits
	Upgrading Program in the Field of " Electrical Equipment" for Industrial School Teachers
Environmental Engineering	Control of Water Quality
Environmental Engineering	Environmental Assessment of Industrial Enterprises
Food and Health	Technology of Food Industries
Food and Health	Public Health Hazards
Hydraulic Engineering	Management of Water Projects
Hydraulic Engineering	Operation and Maintenance of Dams

Category	Training programs / courses
	Metal Removal Techniques
	Applications of Design Codes and Standards
	Applications of Finite Element Technique-I
	Applications of Finite Element Technique-II
	Automatic Transmission Systems
	Cleanness & Handling of Oil
	Design of Automotive Air-Conditioning Systems
	Design of Vertical Deep Well Pumps
	Earing and Drawability in Aluminum Sheets
	Fundamentals of Engine Maintenance
	Fundamentals of Mechatronics
	Fundamentals of Stress Analysis
	Oils, Lubricants and Greases
	Precision Measurements, Fits and Tolerance
	Prevention and Analysis of Mechanical Failures
	Sheet Metal Progressive Die Design
	Units, Design Codes and Specifications
	Vibration Analysis, Measurement and Control
	Vibration of Rotating Machinery
	Workshop on Stress Analysis
Metallurgical Engineering	Applied Metallurgy
	Basics of Iron and Steel making
	Basics of Physical Metallurgy
	Cathodic Protection CP of Pipe Line
	Certification of Welding Inspectors
	Continuous Casting Technology
	Corrosion in Industry and Protection Methods
	Fundamentals of Metallurgy and Rolling Practice
	Fundamentals of physical Metallurgy
	Mass and Energy Balance in Process Engineering
	Mass Balance and Ladle Treatment
	Metallography of Steel
	No-Destructive Testing Techniques
	Physical Metallurgical-I and II for Steel Making Technicians
	Physical Metallurgy and Heat Treatment of Steel
	Rolling Technology in Steel Mills, and Theory and Practice
	Steel Making Technology for Technicians

Category	Training programs / courses
Oil & Gas Engineering	Advanced Well Test Analysis and Workshop
	An Engineering Approach to Deviated & Horizontal Drilling
	Artificial Lift Technology
	Computer Application in Petroleum Engineering
	Drilling Problems & Drilling Optimization
	Enhanced Oil Recovery
	Gas Reservoir Engineering
	Natural Gas Processing
	Pilot Simulation Study Basic Approach
	Advanced Pilot Simulation Study
	Reservoir Simulation –I
	Reservoir Simulation –II
	Advanced Reservoir Simulation –III Selected Reservoir Case Studies
	Advanced Practical Reservoir Engineering
	Well Completion and Workover Operations
	Well Control and Blowout Prevention
	Advanced Well Control and Blowout Prevention
	Well Stimulation Methods
	Well Stimulation Methods Acidizing & Hydraulic Fracturing
Public Work Engineering	Applications of Geographic Information Systems
Structural Engineering	Applied Finite Element Analysis using MARC Program
	Computer Aided Design for Structural Engineers
	Design of Concrete Structures
Management	Library Management
	Presentation Skills
	Technical Report Writing - Advanced I
	Technical Report Writing - Advanced-II
	Technical Report Writing – Basic
	Upgrading of Communication Skills
	Work Programming and Planning

Project Title	Date
Project management for extension of an Ammonium Nitrate plant	2004
Economic and technical assessment of projects as required by national banks. These projects include aluminum factory – reinforcing steel bar mills – paper mill – battery production line – metal industries –steel flats – refrigeration and food industries – metal surface treatment equipment – engineering construction companies – reinforced concrete factories – woven products – agricultural complexes – wheat mills – sugar factories – fiber board wood factories – paper mills etc.	1997-2003
Production planning of an aluminum smelter	1995
Planning and monitoring of aluminum rolling mill project	1993
Curriculum design for the high institute of industrial engineering	1993

Project Title	Date

Inspection of steel structure for a steel mill plant	2000
Architectural design of a weaving firm	1998
Evaluation of the concrete foundation of a coke oven battery	1998
Architectural design of hospital buildings	1997
On-The-Job training in the design of concrete structures	1995
Design of a pipeline underneath Suez Canal	1994
Design of a walk-way bridge	1993
Analysis and tests on concrete slabs	1993
Design of a service building at the National Research Center	1990

Category	Training programs / courses
Development of Research Skills for Fresh University Graduates	Planning and Controlling
	Systems and Creative Thinking
	Research Methods and Writing Proposals
	Statistical Data Analysis
	Team and Work Groups
	Risk Assessment and Risk Management
	Argumentation
	Communication Skills
	Negotiation Skills
	Analytical Thinking
	Problem Solving and Decision Making
	Stress Management
	Accounting for Management
	Basics of Managerial Economics
	Economic Feasibility Studies
	Health, Safety and Environment
	Wellness Guide Lines: Healthful Life
	Introduction to Internet for Research
	The basic Arabic Language Skills of Scientific Writing

Brief History and Objectives:

Environment / Chemical / Mechanical Engineering

Mechanical Design

Metallurgical Engineering

Industrial Engineering and Engineering Economy

Irrigation and Hydraulics

Technical consultations on the effect of water hammer on pipelines

Plans for protection of transmission lines from flash floods

Plans for protection of transformer stations from flash floods

Architectural and Structural Engineering