Curriculum
Vitae
(Employment
History)
of
Prof. Hindawi S. M. Saleh
Professor
at Mechanical Power Dept., Faculty of Engineering
2007
Prof.
Dr. Hindawi S. M. Saleh
Mechanical Power Department
Faculty of Engineering,
Curriculum
Vitae
(Employment History)
1.
Personal
Data:
Name: Hindawi
Nationality: Egyptian
Marital Status: Married,
4 Children
Languages: English
Position: Professor, Mechanical Power
Department, Faculty of Engineering,
Address: Mechanical Power Department, Faculty of Engineering,
Home
Address:
Phone: Home: (00202) 24520626
Office: (00202)3 5709082 – 35733864
Fax:: (00202) 35728811
2.
Fields
of Specialization:
1. Combustion and Internal Combustion
Engines.
2. Energy Efficiency.
3. Pollution Control from Motor Vehicles
and Process
Industry
4. Pollution Prevention and Pollution
Control.
5. Environmental Management Systems and
Compliance
Action
Plans
6. Environmental Impact Assessments.
7. Measurement and Instrumentation
8. Lubrication and Maintenance
3.
Scientific Degrees
1.
B.Sc. (
2. M. Sc. (Cairo University, 1974) -
Internal Combustion Engines.
3.
Ph.D. (Cranfield University – England 1979) Combustion and Pollutants
formation
4.
Education and Work Experience:
August
1969: B.Sc. Degree in
Mech. Power Engineering,
Feb.
1970-
Dec. 1974: Demonstrator, Mech. Power Dept., Faculty of
Engineering,
Dec.
1974-
Oct.
1975: Training, the
Polytechnic of
Oct.
1975-
Sept.
1978: Ph.D. Student, Cranfield
Institute of Technology, Carnfield,
Oct.
1978-
Sept.
1979: Research Officer,
Cranfield Inst. of
June
1979: Ph.D. degree, Cranfield
Institute of
Oct.
1979-
Feb. 1985: Lecturer,
Mech. Power Dept, Faculty of Engineering,
Feb. 1985-
Feb 1990: Associate Prof., Mech. Power Dept., Faculty of
Engineering,
Summer 1987: Visiting Scientist,
1990-
1991: Professor,
Mech. Power Dept., faculty of Engineering,
1991-
1994: On
leave working as associate Prof. Gar-Younis University,
1994-
To Present: Professor, Mech. Power Dept., Faculty of
Engineering.
1995-
1998 Acting
as Part-Time Vice Dean.,
Sept. 1997-
1999 Consultant of the Energy Conservation
and Environment Project, at Development Research and Technological Planning
Center (DRTPC),
1999- 2001 Member of
the Research team of TOSHKA Project- Cairo Univ.
5.
Training Attended:
1.
A two week training
on operation and maintenance of Mobile Air Quality Labs at ESE Company, F1.
2.
One week working
visit to the Air Quality Monitoring Stations and Data Processing, The
Department of Natural Resources,
3.
One-week seminar on
Energy Conservation and use of CNG in the Transportation sponsored by
Organization for Energy
4.
One week seminar on
ESCOS;
5.
One Month Training
On Ground Water Modeling at
6.
Professional Experience:
6.1 Consultations:
Many consultations over the past few years
covered several institutions from public and private sectors. Some of these
are:
1.
Consultant of the
2.
Consultant of
Cimate Change Uint in EEAA in the prepation of the Second Communication of
Egypt to UNFCCC _ Evaluation of green house gas emissions from transport in
Egypt
3.
Consultant in the
preparation of the proposal submutted to GEF on sustainable transport.
4.
Consultation on
preparation of Shoura concil report on energy strategy in
5.
Testing and
performance evaluation of Diesel Generators of Greater
6.
Evaluation of the
combustion performance during iron melting in cupola in Iron-Steel factory at
7.
Design of main and
suction heaters of fuel tanks of
El-Kureimat power plant..
8.
Supervision of
construction and mech. work of
9.
Making
specifications and inspection of laboratory
equipment supplied through US AID
to Egyptian Universities.
10. Sharing as a member of technical committee for the bid
evaluation for supply of 70 amboulance for the ministry of health.
11. Technical Bid Evaluation for 12 millions press for
Dar-Elshaab.
12. Technical Inspection and testing of engine test beds
supplied for the ministry of education.
13. Testing and performance evaluation of truck engines
supplied to High Dam Authority.
14. Technical bid Evaluation of 100 cars supplied to the
ministry of health.
15. Tailored training courses in LPG safety, Technical
writing, and measurements and Control for two petroleum companies.
16. The Egyptian General Authority for standardization
(Egyptian Standard Specifications)
17. Evaluation of Maintenance needs for the Supreme Council for
Monuments fleet (212 cars).
18. Environmental Impact Assessment for El-Nile-Match Company.
19. Environmental Compliance Action Plans for El-Nasr
Automotive Company – Arab Contractors – Tasty Foods – El- Sabe Glue Factory-
El-Rashidy Coumpany
20. Environmental Auditing for several Companies.
21. Energy Audit for Several Companies
22. Evaluation of Bids For
23. Consutant of CAIP project (
24. Inspection of
damage of gas engines supplied to Petrozait company
25. Evaluation of an offer for supplyng large gas engines to
Oriantal Petro-Chemicals.
26. Performance performance of diesel generators of El-Farafra
27. Evaluation ofmachinary and equipment of several mcoupanies
such as:
- El karrakat el masria
- Irrigation coumpany for public
works
- Misr coumpany for imports and
exports
- Eleject coumpany for electrical
installations
- El Shabab contracting coumpany
- El Wagh el Bahary contracting
coumpany
25.
In the present time I am sharing in evaluating two coumpanies, one is a paper manufacturing coumpany and the other is
a textile factory
6.2 Research
Projects:
I had Participated,
as a member of the research team, in the following research projects:
1. Air Pollution From Motor Vehicles in
The City of
1.
Development of a Multi-Fuel Diesel Engines. It was a two Years project sponsored by the
2.
Development of Diesel Engine Produced by Helwan Diesel Factory. It was a
three years joint project between FRCU and Helwan Diesel Factory aiming at the
development and improving the performance of locally produced diesel engines.
4. Explosion
Hazards in Transporting Fuels Through Waterways and Their Approaches. It is a 4 years FRCU project directed to
study the explosion hazards in transporting fuels in waterways such as
5. Fuels,
Lubricants and Greases; Their Storage Handling and Consumption in Transport in
6.
Study of railway Locomotives corrosion. .It
was a two years project financed by the Egyptian Railways to study the wearing
problems and oil degradation when using locally produced high sulphur fuels in
locomotive diesel engines
7.
Rationalization of
Fuel Combustion in Boilers and Industrial Furnaces in
8.
Evaluation of energy consumption in Commercial and
Residential Sectors in
9.
Evaluation of the effect of Privatizaion on Energy
consuption in
10.
Maximization Of the Positive Impacts Of the TOSHKA
Project. It is Sponseres By the
International Bank.
11.
Evaluation and testing of industrial furnaces in Asfour
Glass Factory. It was a four- month
project sponsored by U.S AID through CECEP/DRTCP Project
6.3 Short
and Intensive Professional Courses for Engineers:
Sharing
in organizing and lecturing in many short
courses in the fields of internal combustion engine maintenance,
development and testing, industrial furnaces, corrosion control, air Pollution,
environmental impact assessment, Pollution control, LPG safety, boiler
operation and maintenance.
6.4 Laboratory
Experience:
1. Director of
the heat lab, Mech, Power Dept, Facilty of Eng,m
2. Sharing
in the erection of pollution – instrumentation and ICE research labs in the
faculty of engineering.
3. Director
of the ICE research lab. at the Mech. Power Dept, Faculty of
4. Head of Committees for erection and
purchasing equipment’s for the labs of Aswan Higher
Institute for Energy.
6.5
Membership of Scientific committees and attendance of
conferences:
·
Attended several national and international Scientific
Conferences.
·
Member of the Egyptian Section of the combustion
institute – the Egyptian
Engineering
Syndicate, and Egyptian Committee for Liquid Atomization.
·
Reviewer of several Egyptian Journals.
12.
Teaching
Activities
I had participated lecturing and instructing the
following subjects at
University and other Egyptian universities.
1. Undergraduate
Subjects:
Thermodynamics -Applied thermodynamics and combustion -
Heat engines -Internal combustion engines
-Thermal Engineering Thermal power plants -Mechanical engineering -Basics of
fluid mechanics – Measurements.
2. Post-Graduate
Subjects:
Advanced
thermodynamics -Combustion -Measurements and instrumentation
-Air pollution -Lubrication –Preventive maintenance.
13.
Thesis
Supervision:
A: Finished:
About 20 M. Sc. 10 Ph.D. Thesis.
B:
Work in Progress:
Six M. Sc. and three Ph.D. Thesis
14.
Research
Activities:
Besides
the normal educational activities of a university staff member I had published
about thirty-five papers in the field of specialization in national and
international conferences and journals.